SB-10 Type

SB-10 . SB-11 . SB-12 . SB-13 . SB-14

MATERIAL WITH SINTERED BRONZE LAYER NON-SELF-LUBRICATING

The SB-10 type identifies the bimetallic composite bearing family made of a low-carbon steel shell and an internal layer of sintered bronze (CuSn10Pb10). These type of bearings are used with oil or grease lubrication. The sliding surface is available with several design such as:
SB-10 = even bronze layer
SB-11 = bronze layer with spherical dimples
SB-12 = bronze layer with diamond-shaped dimples
SB-13 = bronze layer with extra-metal for finishing of the inside diameter before the fitting in in the housing
SB-14 = bronze layer with lubrication grooves per customer drawings

SB-10 Type MATERIAL WITH SINTERED BRONZE LAYER NON-SELF-LUBRICATING

MAXIMUM SPECIFIC
LOAD (pv)

Static260 N/mm2

SB-10, SB-11, SB-12, SB-13, SB-14

  • Optimal load capacity
  • Easy assembly and lubrication
  • High thermal conductivity
  • Minimum wear and excellent service life
  • Wide range of operating temperatures
  • Reduced housing size
  • Possibility to have special articles
Dynamic150 N/mm2
MAXIMUM SPEED (v)With lubricants2.5 m/s
WORKING
TEMPERATURE		Minimum-40C°
Maximum+200C°